Mina Raspberry Pi - Gertech

Go to content

Mina Raspberry Pi

Raspberry Pi
Jag har till dags dato elva Raspberry PI:
  • En Raspberry Pi Model B
  • Tre Raspberry Pi 3 Model B
  • Två Raspberry Pi 3 Model B+
  • En Raspberry Pi 4 Model B (2 GHz SDRAM)
  • Fyra Raspberry Pi Zero W

De olika modellerna har följande karakteristika:
Raspberry Pi Model B
  • 700 MHz ARM11 ARM1176JZF-S core
  • 512 MB RAM
  • 2 USB ports
  • 26 GPIO pins
  • Composite video | Composite RCA, HDMI
  • 10/100 wired Ethernet RJ45
  • 3.5 mm audio jack
  • Camera interface (CSI)
  • Secure Digital|SD / MMC / SDIO card slot
  • VideoCore IV 3D graphics core

Raspberry Pi 3 Model B
  • 1.2GHz 64-bit quad-core ARMv8 CPU
  • 802.11n Wireless LAN
  • Bluetooth 4.1
  • Bluetooth Low Energy (BLE)
  • 1GB RAM
  • 4 USB ports
  • 40 GPIO pins
  • Full HDMI port
  • Ethernet port
  • Combined 3.5mm audio jack and composite video
  • Camera interface (CSI)
  • Display interface (DSI)
  • Micro SD card slot (now push-pull rather than push-push)
  • VideoCore IV 3D graphics core
Raspberry Pi 3 Model B+
  • Broadcom BCM2837B0, Cortex-A53 (ARMv8) 64-bit SoC @ 1.4GHz
  • 1GB LPDDR2 SDRAM
  • 2.4GHz and 5GHz IEEE 802.11.b/g/n/ac wireless LAN, Bluetooth 4.2, BLE
  • Gigabit Ethernet over USB 2.0 (maximum throughput 300 Mbps)
  • Extended 40-pin GPIO header
  • Full-size HDMI
  • 4 USB 2.0 ports
  • CSI camera port for connecting a Raspberry Pi camera
  • DSI display port for connecting a Raspberry Pi touchscreen display
  • 4-pole stereo output and composite video port
  • Micro SD port for loading your operating system and storing data
  • 5V/2.5A DC power input
  • Power-over-Ethernet (PoE) support (requires separate PoE HAT)

    Raspberry Pi 4 Model B
      • Broadcom BCM2711, Quad core Cortex-A72 (ARM v8) 64-bit SoC @ 1.5GH
      • 1GB, 2GB or 4GB LPDDR4-3200 SDRAM (depending on model)
      • 2.4 GHz and 5.0 GHz IEEE 802.11ac wireless, Bluetooth 5.0, BLE
      • Gigabit Ethernet
      • 2 USB 3.0 ports; 2 USB 2.0 ports.
      • Raspberry Pi standard 40 pin GPIO header (fully backwards compatible with previous boards)
      • 2 × micro-HDMI ports (up to 4kp60 supported)
      • 2-lane MIPI DSI display port
      • 2-lane MIPI CSI camera port
      • 4-pole stereo audio and composite video port
      • H.265 (4kp60 decode), H264 (1080p60 decode, 1080p30 encode)
      • OpenGL ES 3.0 graphics
      • Micro-SD card slot for loading operating system and data storage
      • 5V DC via USB-C connector (minimum 3A*)
      • 5V DC via GPIO header (minimum 3A*)
      • Power over Ethernet (PoE) enabled (requires separate PoE HAT)
      • Operating temperature: 0 – 50 degrees C ambient

      * A good quality 2.5A power supply can be used if downstream USB peripherals consume less than 500mA in total.
      Raspberry Pi ZeroW
      • 1GHz BCM2835
      • 512MB RAM
      • Mini HDMI
      • USB On-The-Go port
      • Micro USB power
      • HAT-compatible 40-pin header
      • Composite video and reset headers
      • CSI camera connector
      • 802.11b/g/n Wireless LAN
      • Bluetooth 4.1
      • Bluetooth Low Energy (BLE)
      Back to content