Raspberry Pi modules - Gertech

Till innehåll

Raspberry Pi modules

Raspberry Pi
Module
Picture
Quantity
Links/Remarks
Raspberry Pi Touch Display

The 7″ touchscreen monitor for Raspberry Pi

1
Features & Benefits of the Pi LCD Touch Screen

  • Multi-touch capacitive touch screen — supports up to 10 finger touches
  • 7 inch display
  • 800 x 480 pixel resolution at 60 frames per second (fps)
  • 24-bit RGB colour
  • 70° viewing angle
  • Only two connections required
  • Flexible power supply
  • No electronic interference
  • Full Raspbian OS functionality without a keyboard and mouse

Raspberry PI 5MP Camera Board Module

1The Raspberry Pi Camera Module is a 5 megapixel custom designed add-on for Raspberry Pi, featuring a fixed focus lens. It's capable of 2592 x 1944 pixel static images, and also supports 1080p30, 720p60 and 640x480p60/90 video. It attaches to Pi by way of one of the small sockets on the board upper surface and uses the dedicated CSi interface, designed especially for interfacing to cameras
Adafruit Pi T-Cobbler Plus Kit - Breakout for Raspberry Pi 3/2/B+

2
Explorer pHAT

1
Features

  • Four buffered 5V tolerant inputs (perfect for Arduino compatibility)
  • Four powered 5V outputs (up to 500mA total across all four channels)
  • Four analog inputs
  • Two H-bridge motor drivers (up to 200mA per channel; soft PWM control)
  • Explorer pHAT pinout
  • Compatible with Raspberry Pi 3, 2, B+, A+, Zero, and Zero W
  • Python library
  • Female headers require soldering
The inputs use a 5-channel buffer that will accept anything from 2V-5V as logic high.

pHAT DAC
1
Features

  • 24-bit audio at 192KHz
  • Line out stereo jack
  • Optional landing for dual RCA phono connector
  • PCM5102A DAC over the Raspberry Pi's I2S interface
  • pHAT DAC pinout
  • Compatible with Raspberry Pi 3, 2, B+, A+, Zero, and Zero W
  • Female header requires soldering

pHAT DAC doesn't require a Python library.

LiPo SHIM
1
Features

  • 0.8mm thick PCB
  • Shaped to sit as low as possible on the Raspberry Pi
  • 2-pole JST connector ideal for most LiPo/LiIon batteries
  • Power and low battery LED indicators
  • Supplies up to 1.5A continuous current (15uA quiescent current)
  • Low battery warning at 3.4V (asserts GPIO #4 low)
  • Automatic shutdown at 3.0V to protect your battery
  • VBAT+, GND, and EN pins available to break out
  • 2x6 0.1" female header (optional, for non permanent installation)
  • Includes rubber foot to space LiPo SHIM away from your Raspberry Pi
  • LiPo SHIM pinout
  • Compatible with Raspberry Pi 3, 2, B+, A+, Zero, and Zero W
  • Requires soldering


Pibow Zero Case for Raspberry Pi Zero version 1.3

1
Features

  • Compatible with Raspberry Pi Zero v1.3
  • Super-slimline profile
  • Fully HAT/pHAT compatible
  • Protects your beloved Pi Zero!
  • Clear top and base leave Raspberry Pi Zero visible
  • GPIO cut-out
  • Leaves all ports accessible (encloses micro-SD)
  • Made from lightweight high-quality cast acrylic
  • Great for hacking and tinkering!
  • Made in Sheffield, UK

Tillbaka till innehåll